DT SWISS Hub 240s Straightpull F/110 or R/148 28H BOOST thru axle Center LocK DT SWISS Hub 240s Straightpull F/110 or R/148 28H BOOST thru axle Center LocK

Switzerland is known for good chocolate, first-class cheese and miracles of precision mechanics. 

The attention to detail that brings these products can also be found in the DT Swiss 240s hubs. 

Above all, the love of mechanics can be easily determined. The tried-and-tested toothed belt freewheel, 

which is toothed with 18 teeth, is extremely reliable and hardly needs to shy away from the Swiss watch movement. 

The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. 

The labyrinth sealing system, along with grinding discs and bearing rings made of stainless steel, ensure a long service life. 

DT Swiss constantly improves its own products. The goals are extreme reliability and, of course, lightweight construction. 

In the mechanics of the hubs, however, the development department reached its limits. Lighter with consistent reliability seems hardly possible. 

As potential for improvement, however, the spoke flanges were identified. 

By using straight spokes - Straightpull - the load of the spokes is lowered and the risk of spoke breaks is reduced to a minimum! 

Technical specifications:

intended use : Cross Country, Marathon, All Mountain, Enduro 

Material: aluminum, steel 

Installation width F:15x110/R:12x148 mm 

axle type : 12x148 mm plug axis (Boost / outboard) 

Number of holes: 28 holes 

Disc holder: Center Lock

Freewheeling Compatibility: 10 &11-speed Shimano System

Spoke Type: Straightpull 

bearing : 4x industrial bearing 

Seal: labyrinth rubber seals 

Spoke tension: 1200N 

maximum rider weight: without weight restriction 

Color: black with red decals 

Weight: F:123g/R:231g 

Options: Front / Rear or Set

Switzerland is known for good chocolate, first-class cheese and miracles of precision mechanics. 

The attention to detail that brings these products can also be found in the DT Swiss 240s hubs. 

Above all, the love of mechanics can be easily determined. The tried-and-tested toothed belt freewheel, 

which is toothed with 18 teeth, is extremely reliable and hardly needs to shy away from the Swiss watch movement. 

The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. 

The labyrinth sealing system, along with grinding discs and bearing rings made of stainless steel, ensure a long service life. 

DT Swiss constantly improves its own products. The goals are extreme reliability and, of course, lightweight construction. 

In the mechanics of the hubs, however, the development department reached its limits. Lighter with consistent reliability seems hardly possible. 

As potential for improvement, however, the spoke flanges were identified. 

By using straight spokes - Straightpull - the load of the spokes is lowered and the risk of spoke breaks is reduced to a minimum! 

Technical specifications:

intended use : Cross Country, Marathon, All Mountain, Enduro 

Material: aluminum, steel 

Installation width F:15x110/R:12x148 mm 

axle type : 12x148 mm plug axis (Boost / outboard) 

Number of holes: 28 holes 

Disc holder: Center Lock

Freewheeling Compatibility: 10 &11-speed Shimano System

Spoke Type: Straightpull 

bearing : 4x industrial bearing 

Seal: labyrinth rubber seals 

Spoke tension: 1200N 

maximum rider weight: without weight restriction 

Color: black with red decals 

Weight: F:123g/R:231g 

Options: Front / Rear or Set